This Rip Cord Club of the World (R.C.C.W.) badge is an interesting and little known parachutist badge from the inter-war years. Unlike the various Caterpillar Club membership pins which were presented to recipients whose life had been saved by a parachute, the R.C.C.W. badge identified that the wearer had voluntarily made a parachute descent.
To quote a letter from George Loudon, a member of the club, to the New Castle News (New Castle, Pennsylvania), published Friday December 8, 1933: “To become a member of the C. C. [Caterpillar Club] a person must make an emergency jump, saving his or her life by the use of a parachute, while to become a member of the R. C. C. W. one must make a volunteer jump, either after graduating or under the instruction of a graduate of the Chunate (sic) School of Parachute Rigging.”
He goes on to say: “The R. C. C. W. has thousands of members all over the world, wherever the United States maintains an air corps station. The Caterpillar Club has 563 members at the present time.”
George Loudon’s letter indicates that this badge may have been used as an unofficial military parachute rigger’s badge as a rigger qualification wings did not exist for the Navy until 1942 and (unofficially) for the Army / Air Force until 1948. Chanute Field (incorrectly spelt as Chunate in newspaper) at Rantoul, Illinois was home to the Air Training Corps School and under various restructures conducted parachute and parachute rigger related training from 1922 until its closure in 1993.
Louis M. Lowry, who along with eight other airmen graduated from Parachute Riggers School class Number 2 on 16 October 1931, became member number 243 when he conducted his first jump a week previously. Lowry later went on to work for North American Rockwell Corporation from 1943 to 1969.
Upon completion of their first jump, members of the Rip Cord Club of the World were presented with a certificate which recorded their membership (Rip number) and badge. The certificate stated,
“Know ye that …(name)… did this date voluntarily separate himself from an airplane at an altitude of two thousand feet and that after the usual antics incident to the law of falling bodies did succeed in causing his parachute to become disengaged from its pack and open in the prescribed manner. That upon landing, than which there was nothing surer, he was found to be enjoying life, and although his spirits were possibly dampened, he was still in possession of the Rip Cord used to release the parachute of which he was an appendage in making said landing. He is therefore a full fledged life member of this worthy order as such we trust will continue to preform his duties as competently and gloriously as he has this day…of…in the year of our Lord one thousand nine hundred …(year)…”
The lowest number certificate that I am aware of is #5 which was presented to Edmund Paul Taylor on 14 October 1927 which indicates that the club may have started around that time. This certificate was authorised by ‘Tug’ Wilson, but I am not sure if this was ‘the’ Harry ‘Tug’ Wilson who, in 1940, became instrumental in the development of the US Army Airborne’s ‘Test Platoon’ and after whom the honor graduate award of the Army Jumpmaster Course is named.
However, membership of the Rip Cord Club of the World was not just restricted to military personnel. The San Diego Air & Space Museum holds artifacts related to Birdie Draper, an early female daredevil, pilot and parachute rigger.
Birdie Viola Draper was born in 1916 in Minneapolis, Minnesota. In 1937 at the age of 20, Birdie began her training as a parachutist with Stub Chrissinger, an instructor for Hinck Flying Service. Mr. Chrissinger was one of two licensed parachute riggers in Minnesota at the time. After her training, Birdie joined a stunt group of Thrill Day Performers traveling to State Fairs. She was paired up with Captain F. F. (Bowser) Frakes who was best known for his daring plane crashing stunts. Birdie gained fame by crashing through sixteen sticks of dynamite with her car, as well as solid masonry walls. Her vast array of death defying stunts earned her the name, “The Queen of Daredevils.” By 1940, Birdie had completed thirty-five parachute jumps. She retired as a daredevil, in 1941, after receiving her license as a parachute rigger from the Department of Commerce. Shortly afterwards she took a position as a rigger for the Ryan Aeronautical Company. Birdie married George Griffin, a local attorney and then retired from the Ryan Aeronautical Company in 1945. She died on November 1, 2005.
Birdie’s R.C.C.W. certificate indicates that she was Rip number 533 qualifying on 9 June 1937 which indicates that George Loudon’s claim back in 1933 of “thousands of members all over the world” may have been somewhat of an exaggeration. What remains unclear to me is how long the organisation was active and when it ceased operation. So far, I have not been able to find any information to indicate that it was still going past the outbreak of WW2 and I can only speculate that it may have started to wind up as a result of the development of the military airborne units which in turn brought about a much greater uptake of ‘voluntary’ parachuting in the post-war years.
It is also worth noting that during the 1930’s a breakaway Rip Cord Club of the United States (R.C.C.U.S.) was established. I am unsure of the exact date of its formation although some sources indicate this occurred as early as 1931. By the end of 1935 this club had around 50 members who appear to be mainly drawn from the military rigging courses and by early April 1937 this number had grown to over 300 members with number 312 being issued on 6 April. The R.C.C.U.S. certificate design is very similar to the R.C.C.W. design with only subtle differences in the title, tumbling jumper on the right and insignia design. However, at this stage, I do not know if that distinct insignia was presented to accompany the certificate (shown below).
The badge most commonly presented by the Rip Cord Club of the World appear to made by the Hardie Jewelry Company of Holland MI as most bare their H.J.Co hallmark either near the top of the canopy or near the base of the globe near the intersection with the jumper. However, a screwback post badge also exists and is held by the Smithsonian Institution as part of the Katherine M. Smart bequest. That example, which looks to be struck from brass and finished with a silver wash, does not appear to be maker marked. The same collection also holds a smaller gold lapel/tie pin. As can be seen in one of the images from the Birdie Draper collection (shown below, click on the image to enlarge), members often wore the badge as a both a brooch and tie pin. So, the existence of the badge with the screwback post is intriguing as the post implies that it would either need to be placed through a lapel ‘button hole’, or the wearer would have to customise the garment by cutting a hole large enough to fit the post. This leads me to suspect that this version may have been used as a ‘uniform’ item, possibly by civilian barnstorming entertainers like Birdie, although her uniforms do not show the R.C.C.W badge being worn.
If anybody can help with more information about the Rip Cord Club of the World or the Rip Cord Club of the United States and help fill in the gaps of my knowledge, please contact me.
If you like what you see here, please FOLLOW this page via email or by using either the buttons below or in the column on the right. I try to post NEW content as often as possible and knowing that somebody is looking at this gives me the encouragement I need to set aside time to go through my archives and collection in order to develop the content for the page. And of course, feel free to contact me here, via email or by visiting my Facebook or Instagram pages